Using Other Features; Using "Bravia" Sync Features - Sony STR-DA4600ES Operating Instructions Manual

Using Other Features

Using "BRAVIA" Sync
features
What is "BRAVIA" Sync?
"BRAVIA" Sync is compatible with a Sony
TV, Blu-ray Disc/DVD player, AV amplifier,
etc., that is equipped with the Control for
HDMI function.
By connecting Sony components that are
compatible with the "BRAVIA" Sync with an
HDMI cable (not supplied), operation is
simplified as below:
– One-Touch Play (page 98)
– System Audio Control (page 98)
– System Power-Off (page 99)
– Theater Mode Sync (page 99)
Control for HDMI is a mutual control function
standard used by HDMI CEC (Consumer
Electronics Control) for HDMI (High-
Definition Multimedia Interface).
The Control for HDMI function
does not work in the following
cases:
• When you connect the receiver to a
component which is not correspond with
Sony Control for HDMI function.
• When you connect the receiver and
components using other than HDMI
connection.
• The Control for HDMI function does not
work on a component connected to the
HDMI OUT B jack of the receiver.
We recommend that you connect the receiver
to products featuring "BRAVIA" Sync.
Note
Depending on the connected component, the
Control for HDMI function may not work. Refer to
the operating instructions of the component.
Preparing for the "BRAVIA"
Sync
To use the "BRAVIA" Sync, turn the Control
for HDMI function on for both the receiver
and the connected component.
Turn the Control for HDMI function of the
receiver and the connected component on
individually.
Use the multifunction remote for this
operation. This operation cannot be performed
using the simple remote.
GUI
MODE
1
Press AMP.
The receiver can be operated using the
remote.
2
Press MENU.
The menu is displayed on the TV screen.
3
Select " Settings" from the
menu, then press
4
Select "HDMI," then press
or b.
?/1
AMP
HDMI
input
buttons
V/v/b,
MENU
or b.
continued
97 GB