Function For Conversion Of Video Signals - Sony STR-DA4600ES Operating Instructions Manual

To connect a camcorder, video game
To the VIDEO 2 IN jacks
C Audio/video cord (not supplied)

Function for conversion of video signals

This receiver is equipped with a function for converting video signals.
• Composite video signals can be output as HDMI video and component video signals.
• Component video signals can be output as HDMI video and video signals.
As the initial setting, video signals input from the connected component are output to the HDMI
OUT or MONITOR OUT jacks as shown in the table below.
We recommend you set the video conversion function to match the resolution of the monitor you
are using.
For details on the video converting function, see "Video settings" (page 121).
OUTPUT jack
INPUT jack
HDMI IN 1/2/3/4*
VIDEO IN
COMPONENT VIDEO IN
a : Video signals are output.
– : Video signals are not output.
* HDMI video signals cannot be converted to component video signals and video signals.
32
GB
Note
Before connecting cords, make sure to disconnect
the AC power cord (mains lead).
HDMI OUT A/B
a
a
a
C
COMPONENT VIDEO
MONITOR OUT
–
a
a
Camcorder,
video game
MONITOR VIDEO OUT
–
a
a