Sony STR-DA4600ES Operating Instructions Manual page 92

Making a zone 2 configuration using ZONE 2 VIDEO OUT (RJ-45 jack)
ZONE 2 VIDEO OUT (RJ-45 jack) is used only for custom installation by a qualified person.
ZONE 2 VIDEO OUT (RJ-45 jack) is a jack that sends a source video signal to the component
video input for zone 2. For details, consult your dealer.
Note
This jack is not for an Ethernet LAN connection.
ZONE 2 VIDEO OUT (RJ-45 jack) connection
The RJ-45 pinouts use the T568B standard.
Refer to the illustration below.
ZONE 2 VIDEO OUT
(RJ-45 jack)
Note
CAV-CVB1 (Component Video Balun) must be used. Other types will cause trouble and may void your
warranty.
RJ-45 Video Pinout
The RJ-45 pinouts use the T568B standard.
Refer to the illustration below.
92
GB
Component Video Balun
CAV-CVB1
CAT5 cable
Pinout
A Pin 1
B Pin 2
C Pin 3
D Pin 4
E Pin 5
F Pin 6
G Pin 7
H Pin 8
Component video
cable
Wire color
BLUE/Pb (R) White/Orange
BLUE/Pb (T) Orange
GREEN/Y (R) White/Green
GND Blue
+11V White/Blue
GREEN/Y (T) Green
RED/Pr (R) White/Brown
RED/Pr (T) Brown
Zone 2
TV
monitor