Tuning
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver
(page 39).
Tip
The tuning scale for direct tuning is shown below.
• FM band
100 kHz
• AM band 10 kHz*
* The AM tuning scale can be changed (page 63).
Tuning into a station
automatically (Auto Tuning)
1
Select "
FM" or "
from the menu, then press
or b.
The FM or AM menu list appears on the
TV screen.
2
Select "Auto Tuning," then
press
.
3
Press V/v.
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
62
GB
In case of poor FM stereo
reception
1
2
3
4
Tuning into a station directly
(Direct Tuning)
Enter the frequency of a station directly by
using the numeric buttons on the multifunction
remote. This operation cannot be performed
using the simple remote.
V/v/b,
OPTIONS
MENU
Numeric
buttons
AM"
1
Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
(page 62), or select the preset station
you want (page 64).
Press OPTIONS.
The option menu appears.
Select "FM Mode," then press
Select "MONO," then press
SHIFT
Press AMP.
The receiver can be operated using the
remote.
.
.
AMP
V/v/b,
MENU