Selecting The Speaker Pattern - Sony STR-DA4600ES Operating Instructions Manual

4
Press V/v repeatedly to select
"Impedance," then press
5
Press V/v repeatedly to select
"4 ohms" or "8 ohms"
depending on the speakers you
are using, then press
The parameter you have selected is
entered.
6
Press RETURN/EXIT O.
To exit the menu
Press MENU.
Notes
• If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often on the back of the speaker.)
44
GB
• When you connect all speakers with a nominal
impedance of 8 ohms or higher, set "Impedance" to
"8 ohms." When connecting other types of
speakers, set it to "4 ohms."
• When you connect front speakers to both the
FRONT A and FRONT B terminals, connect the
speakers with a nominal impedance of 8 ohms or
higher.
– When you connect speakers with impedance of
16 ohms or higher in both "A" and "B"
configuration:
. Set "Impedance" to "8 ohms" in the Speaker
settings menu.
– For other types of speakers in other
configurations:
Set "Impedance" to "4 ohms" in the Speaker
settings menu.

Selecting the speaker pattern

Select the speaker pattern according to the
speaker system which you are using.
1
Press MENU.
The menu is displayed on the TV screen.
.
2
Press V/v repeatedly to select
"
b.
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
"Speaker," then press
4
Press V/v repeatedly to select
"Speaker Pattern," then press
The Speaker Pattern screen appears.
5
Press V/v to select the speaker
pattern you want, then press
6
Press RETURN/EXIT O.
Settings," then press
.
.
or
.