Chapter 3 Detailed Explanation; Turning The Power On And Off; Turn On/Off The Power To The Microscope; Eco Mode And Sleep Mode - Nikon ECLIPSE Si Instructions Manual

Upright microscope
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Chapter 3
Detailed Explanation
3
Detailed Explanation
3.1

Turning the Power On and Off

3.1.1

Turn On/Off the Power to the Microscope

Powering on the microscope
Connect the AC adapter to turn on this microscope.
Connect the DC plug of the AC adapter to the DC IN
connector on the rear of the product. Plug a power cord into
the AC adapter's inlet for equipment, and the wall outlet.
When the power is turned on, the startup screen appears
on the status display. Then, the control screen appears as
usual.
Powering off the microscope.
To turn off the microscope, unplug the AC adapter.
3.1.2

ECO Mode and SLEEP Mode

The ECO and SLEEP modes are used to put the microscope into the energy-saving state.
During the energy-saving state in both modes, diascopic illumination and the LCD screen are turned off to
save energy.
ECO mode:
When the microscope (turned on) is left idle for a specified
period of time, the microscope is put into the energy-saving
state. Long-press the brightness control knob to turn on or
off the ECO mode (default: on). When the ECO mode is
turned on, "ECO" is shown on the status display.
Setting the time to put the microscope into the
energy-saving state.
You can set how long the ECO mode waits before the
microscope is put into the energy saving state from the
SET UP screen (default: 15 minutes).
Observation through only eyepieces or long-term
observation (without part operation)
Turn off the ECO mode.
SLEEP mode:
The microscope can be put into the energy saving state
anytime.
Long-press the illumination on/off button to immediately put
the microscope into the energy-saving state.
Recovery from the energy-saving state
Perform the following to bring the microscope back to the
normal operating state:
Turn or press the brightness control knob.
Press the illumination on/off button.
Turn the nosepiece.

Chapter 3 Detailed Explanation

79
Startup screen
Control screen
Brightness
control knob
Operating the brightness control knob
• Long-press: Turn the ECO mode on or off.
Operating the illumination on/off button
• Long-press: Activate the SLEEP mode.
"ECO" is displayed.
Control screen
Illumination
on/off button

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

17-151b ​

Table of Contents