Chapter 3 Detailed Explanation; Moving, Installing, And Storing The Microscope - Nikon ECLIPSE Ei Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Chapter 3

Detailed Explanation

3.1

Moving, Installing, and Storing the Microscope

Moving the microscope



When changing the installation location, or taking the

microscope out of the storage location to install it, carry and

install it according to the following appropriate method.

The microscope has carrying handholds and handles.

There are three handholds on the base and two handles on

the arm of the microscope. When carrying the microscope,

hold the microscope firmly by these handholds and

handles.

• The storage part on the rear of the microscope is

not a handle. Do not hold this part as it stores the

AC adapter and power cord.

• When moving the product, do not hold by the

focus knobs, eyepiece tube, and stage, etc. The

parts may become detached and also result in

malfunctions.

Installing the microscope



Install the microscope in a place appropriate for

observation. → "Notes on Handling the Product" - 3,

"Installation location and storage location"

When the microscope is carried from the storage location,

the binoculars of the eyepiece tube are usually fixed

backward. In this case, fix the direction of the eyepiece tube

to the observation point (the binoculars are toward you).

→ Chapter 4, "Assembly" - Step 2, "Change the direction of

the eyepiece tube, remove and attach the eyepiece tube"

Loosen the fixing screw for the eyepiece tube a

couple of turns, and then turn the eyepiece tube. If

the screw head protrudes, turning the eyepiece tube

might damage the circular dovetail mount of it by the

screw head.

Pull out the AC adapter and power cord from the storage

part on the rear of the microscope.