Figure 24. Interface Grouping - ADTRAN 400 Series Basic Configuration Manual

Device Info
Advanced Setup
Layer2 Interface
WAN Service
LAN
NAT
Security
Parental Control
Quality of Service
Routing
DNS
UPnP
FTP
SIP ALG
CloudAgent
DNS Proxy
Storage Service
Interface Grouping
IP Tunnel
Certificate
Power Management
Multicast
Wireless
DownloadFiles
Diagnostics
Management
Logout

Figure 24. Interface Grouping

This completes adding a Video configuration.
Select WAN Service from the side menu and
61287RGONT-29C
Revision C
Interface Grouping -- A maximum 16 entries can be configured
Interface Grouping supports multiple ports to WAN interfaces and bridging groups. Each group will perform as an
independant network. To support this feature, you must create mapping groups with appropriate LAN and WAN interfaces
using Add button. The Remove button will remove the grouping and add the ungroupedinterfaces tot he Default group.
Only the default group has IP interface
Group Name Remove WAN Interface
ppp0.3
veip0.4
Default
veip0.2
Default_Video
Video veip0.1
Add
Remove
Figure 25
Basic Configuration
LAN Interface DHCP Vendor IDs
eth0.0
wlan0
eth2.0
eth3.0
wlan1
wl1_GuestG|wl1.1
AMINO*
ENTONE*
Entone*
udhcp_*(ADB)
minerva*
DPC5003
DC1747TLV3
eth1.0 DHCP Gp 1
on page 50 is displayed.
49