Commissioning/Service Reports; Hydraulic Parameters Report; Control Parameters Report - Viessmann Vitocal 200-S Installation And Service Instructions Manual

Commissioning/service reports

Hydraulic parameters report

Setting and test values
Testing the external heating circuit pumps
Circulation pump type
Circulation pump stage
Overflow valve setting
Primary circuit commissioning
Temperature, air intake
Temperature, air discharge
Temperature differential ΔT:
Secondary circuit flow temperature =
35 °C at air intake temperature ≤ 15 °C
Secondary circuit flow temperature =
35 °C at air intake temperature > 15 °C
Testing the mixer, heat pump and cylinder heating
Tested under the following conditions:
Room temperature
Outside air temperature
Temperature "Cylinder temp. top" con-
stant?
Secondary circuit flow temperature
Temperature differential ΔT
"Flow temp. secondary" / "Return temp.
sec."

Control parameters report

For a description of parameters, see
separate service instructions, heat pump
control unit.
114
Set value
°C
°C
K 3 to 5
K 2 to 4
°C
°C
Yes (±1 K)
°C Rising
6 to 8 K
Commission-
ing
From To