Table of Contents
Advertisement
Mechanical strength
Contamination level
Overvoltage category
Tab. 6-1: Ambient conditions
NOTICE
Due to the risk of corrosion, avoid sulphurous gases (e.g. sulphur dioxide (SO
and hydrogen suphide (H
NOTICE
The ambient air must not contain acids, alkaline solutions, corrosive agents,
●
salts, metal vapors and other electrically conductive contaminants in high
concentrations
The devices to be installed into the housing and installation compartments
●
must at least comply with the degree of protection IP 54 according to DIN EN
60529.
The device shall be provided in a suitable fire enclosure in the end-use appli-
●
cation.
DOK-SUPPL*-VDPXX.3MTBU-IT03-EN-P
In operation
Max. vibration:
Frequency range: 10...
150 Hz
Excursion: 0.075 mm at
10...57 Hz
Acceleration: 1 g at
57...150 Hz
Acc. to EN 600068-2-6
2
2
Defective product due to gases jeopardizing
functions
S)). The product is not resistant against these gases.
2
Failure of the product due to contaminated air
Transport
Max. shock:
15 g 11 ms
Acc. to EN 60068-2-27,
No malfunction
2
-
Bosch Rexroth AG
Ambient conditions
Storage
Max. shock:
15 g 11 ms
Acc. to EN 60068-2-27,
No malfunction
2
-
2
9/37
)
Advertisement
Table of Contents
