Advertisement
Quick Links
IFS POC2502 Series Quick Start Guide
Content
This is the IFS NS4802-24P-4S-2X Quick Start Guide. This
document provides basic instructions for installing and using
the IFS NS4802-24P-4S-2X.
Package Contents
Thank you for purchasing IFS - Multi-port Coax + 2-port
10/100/1000T + 2-port 100/1000X SFP Long Reach PoE over
Coaxial Managed Switch
The description of this model is shown below:
8-port Coax + 2-port 10/100/1000T + 2-port
POC2502-
100/1000X SFP Long Reach PoE over Coaxial
8CXP-2T-2S
Managed Switch
16-port Coax + 2-port 10/100/1000T + 2-port
POC2502-
100/1000X SFP Long Reach PoE over Coaxial
16CXP-2T-2S
Managed Switch
"POC2502 Managed Switch" is used as an alternative name
in this Quick Installation Guide.
Open the box of the POC2502 Managed Switch and carefully
unpack it. The box should contain the following items:
•
The POC2502 Managed Switch x 1
•
•
•
Power Cord x 1
P/N 1073046 • REV A • 10SEP15
•
•
•
BNC Female Dust Cap x 8 (POC2502-8CXP)
•
BNC Female Dust Cap x 16 (POC2502-16CXP)
•
Warning Sticker x 8 (POC2502-8CXP)
•
Warning Sticker x 16 (POC2502-16CXP)
•
If any item is found missing or damaged, please contact your
local reseller for replacement.
Requirements
•
Workstations running Windows XP/2003/Vista/7/8/2008, or
other platforms are compatible with TCP/IP protocols.
•
Workstations are installed with Ethernet NIC (Network
Interface Card)
•
Serial Port Connection (Terminal)
•
The above Workstations come with COM Port (DB9) or
USB-to-RS232 converter.
•
The above Workstations have been installed with
terminal emulator, such as Hyper Terminal included in
Windows XP/2003.
•
Serial cable -- one end is attached to the RS232 serial
port, while the others end to the console port of the
Managed Switch.
• Ethernet Port Connection
•
Network cables -- Use standard network (UTP) cables
with RJ45 connectors.
•
The above PC is installed with Web Browser and JAVA
runtime environment plug-in.
1
Advertisement
Related Manuals for Interlogix POC2502 Series
Summary of Contents for Interlogix POC2502 Series
-
Page 1: Table Of Contents
IFS POC2502 Series Quick Start Guide • RS-232 to RJ45 Console Cable x 1 • SFP Dust Cap x 2 Content • BNC Female Dust Cap x 8 (POC2502-8CXP) Package Contents 1 • BNC Female Dust Cap x 16 (POC2502-16CXP) -
Page 2: Terminal Setup
Switch, please use the procedures as follows: Show the current IP Address At the “POC2502 Series#” prompt, enter “show ip ”. The screen displays the current IP address as shown in Figure 3. Figure 2: COM Port Configuration... -
Page 3: Saving The Configuration Via The Console
Configuring IP Address 3. At the “POC2502 Series#” prompt, enter “configure”. 4. At the “POC2502 Series (config)#” prompt, enter the following command and press <Enter> as shown in Figure Figure 5: The Configuration Screen Starting Web Management POC2502 Series(config)# ip address 192.168.1.100 mask 255.255.255.0... -
Page 4: Starting Long Reach Poe Communication
The following shows how to start up the Long Reach PoE the quality of the copper wire and Communication of the POC2502 Managed Switch from Web environmental factors. Management. IFS POC2502 Series Quick Start Guide... -
Page 5: Saving The Configuration Via The Web
Web UI. Directly pulling out the coaxial cable could damage the Long Reach Ethernet coaxial Extender and the BNC female connector of the POC2502 Managed Switch. Press the “Apply” button to save running configuration to startup configuration. IFS POC2502 Series Quick Start Guide... -
Page 6: Recovering Back To Default Configuration
Contact information www.interlogix.com or www.utcfssecurityproducts.eu. For customer support, see www.interlogix.com/customer- support © 2015 United Technologies Corporation Interlogix is part of UTC Climate Controls & Security, a unit of United Technologies Corporation. All rights reserved. IFS POC2502 Series Quick Start Guide...