2 POTS, 2 GigE ONT Installation and Maintenance Practice
Wire Gauge
16 AWG
18 AWG
20 AWG
22 AWG
To make connections from the LPS to the IDC connector complete the following steps:
1. Remove the IDC connector from the inner module if installed (see
The IDC Connector socket is pressure mounted to the printed
circuit board (pcb). If the IDC connector base is removed from the
pcb during removal of the IDC connector, carefully re-install it by
applying downward pressure.
32
Table 2. DC Drop Distance by Wire Gauge
Distance in Feet
Figure 20. IDC Connector - Inner Module
Distance in Meters
45
28
18
11
NOTE
Remove IDC connector
from inner module.
14
8
5
3
Figure
20).
61187602G2-5A