Table of Contents
Advertisement
The optical installation is intended to be installed by trained
service personnel only. This is a 'Class 1 Laser Product'.
The 10/100/1000Base-T port(s) and POTS are classified as Type 4
as defined in Appendix B of GR-1089-CORE Issue 4, and is
suitable for connection to intra-building or unexposed wiring or
cabling only. Do not metallically connect these ports to interfaces
which connect to the Outside Plant (OSP) or to the OSP wiring. The
10/100/1000Base-T ports and POTS are designed for use as an
intra-building interface only (Type 4 ports as described in GR-
1089-CORE Issue 4) and require isolation from exposed OSP
cabling. The addition of Primary Protectors is not sufficient
protection in order to connect this interface metallically to OSP
wiring.
The Total Access 300 2 POTS, 2 GigE ONT (1187602G2) is
designed to operate with nominal operating voltage of 12Vdc and
minimum operating voltage of 10.5Vdc.
COMPONENTS AND INTERFACES
The ONT consists of the following components and interfaces:
•
"Mechanical Components"
•
"Circuit Board"
•
"ONT Interfaces"
61187602G2-5A
on page 6
on page 13
on page 15
CAUTION
NOTE
NOTE
Installation
5
Advertisement
Table of Contents
Troubleshooting
