Panasonic MK-ZJ3500KTN Service Manual page 17

6.5. Bottom plate
1. Remove the torx screws (T20 / 8 pcs.) from the Bottom
plate for removal there of
6.6. Cord box
1. Power cord is removed from a stopper part and the Cord
box is removed from the Body ass'y.
6.7. Body(left)
1. A minus driver is put in a gap of the Body ass'y and the
Body(left) and Body(left) is removed from the Body ass'y
while open the clows of Body(left).
6.8. P.C.B. (power)
1. Disconnect the connector from the P.C.B. (power).
2. Disconnect the fasuton terminals from the P.C.B. (power).
3. The P.C.B. case is taken out from the Body ass'y and a
lead line is removed from a cord clamp.
4. A fixed screw (1) is removed and the P.C.B. (power) is
removed from the P.C.B. case.
6.9. Switch unit
1. The fixed screws (3 pcs.) are removed, switch unit, tem-
porary removal trout.
6.9.1. Resolution of switch unit
Cover of rotary switch
• Cover of rotary switch is removed while forcing clows.
17