6 Disassembly and Assembly Instructions
For assembly, refer to the Assembly Instructions, and perform the procedures in the opposite order of disassembly.
6.1.
Attachment
1. Remove the Fixing lever for removal of the Grinder head
section.
6.2.
Storage part for attachment
1. Storage part for attachment in the body rear is drawn out
and removed from the Body ass'y.
6.3.
Lid of cord storage
1. Lift the Lid of cord storage, decide to push a hinge part of
a lid inside and remove a lid from the Body ass'y.
2. Power cord is drawn out.
6.4.
Switch knob
1. The body stave, and remove the Switch Knob using a
minus driver.
16