Brother MFC-J1010DW Online User's Manual page 510

Level 3
Fax Journal
User Settings
Network Configuration Print a list of your Network settings.
WLAN Report
Caller ID History
[Machine Info.]
[All Settings] > [Machine Info.]
Level 3
Serial No.
Firmware Version
Firmware Update
Firmware Auto Check -
Page Counter
[Initial Setup]
[All Settings] > [Initial Setup]
Level 3
Date & Time
Station ID
Tone/Pulse
(Available only for some
countries.)
Fax Auto Redial
Dial Tone
Compatibility
Reset
Descriptions
Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
Print a list of your settings.
Print the wireless LAN connection results.
Print a list of the available Caller ID information of the last 30 received faxes and
telephone calls.
Level 4 Descriptions
- Check your machine's serial number.
Main Version Check your machine's firmware version.
- Update your machine to the latest firmware.
View firmware information on the Home screen.
- Check the total number of pages the machine has printed.
Level 4
Date
Time
Clock Type
(USA and Canada
only)
Auto Daylight
(USA and Canada
only)
Time Zone
Fax
Name
-
-
-
-
Machine Reset
Descriptions
Add the date and time on the screen and in the headings of the
faxes you send.
Select the time format (12-hour or 24-hour).
Set the machine to change automatically for Daylight Saving
Time.
Set your time zone.
Enter your name and fax number so it appears on each page
you fax.
Select the dialing mode.
Set the machine to redial the last fax number if the fax did not go
through because the line was busy.
Shorten the dial tone detect pause.
Adjust the equalization for transmission difficulties.
VoIP service providers offer fax support using various standards.
If you regularly experience fax transmission errors, select Basic
(for VoIP).
Restore all the machine's settings that you have changed, such
as Date and Time.
504