Brother MFC-J1010DW Online User's Manual page 486

Home > Machine Settings
Tone or Pulse Dialing Mode
Set Tone or Pulse Dialing Mode
Your machine is set for a Tone dialing service. If you have a Pulse dialing (rotary) service, you must change the
dialing mode.
This feature is not available in some countries.
>> MFC-J1010DW/MFC-J1012DW
>> MFC-J1170DW
MFC-J1010DW/MFC-J1012DW
1. Press Settings.
2. Press a or b to make your selections:
a. Select [Initial Setup]. Press OK.
b. Select [Tone/Pulse]. Press OK.
c. Select [Tone] or [Pulse]. Press OK.
3. Press Stop/Exit.
MFC-J1170DW
1. Press [Settings] > [All Settings] > [Initial Setup] > [Tone/Pulse].
2. Press [Tone] or [Pulse].
3. Press .
Related Information
• General Settings
Related Topics:
• Telephone and Fax Problems
> Change Machine Settings from the Control Panel > General Settings > Set
480