Brother DCP-J1100DW Product Safety Manual
Hide thumbs Also See for DCP-J1100DW:

Advertisement

Quick Links

(EU only)
Read this guide before attempting to operate the product, or before attempting any maintenance.
Failure to follow these instructions may result in an increased risk of personal injury or damage to
property, including through fire, electrical shock, burns or suffocation. Brother shall not be liable for
damage caused where the product owner has failed to follow instructions set out in this guide.
How to use this guide:
1. Read the whole guide before using your product and keep it for later reference.
2. Carefully follow the instructions set out in this guide and always ensure that you follow all
warnings and instructions marked on the product.
3. If you have concerns about how to use your product after reading this guide, contact Brother
customer service or your local Brother dealer.
4. To ensure you understand all of the instructions, study the Symbols and Conventions used in
the documentation.
NOTE
For more advanced instructions, information, and product specifications, see the Online User's Guide
at support.brother.com/manuals
Product Safety Guide
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan
DCP-J1100DW / MFC-J1300DW
Brother Industries, Ltd.
1

Advertisement

Table of Contents
loading

Summary of Contents for Brother DCP-J1100DW

  • Page 1 2. Carefully follow the instructions set out in this guide and always ensure that you follow all warnings and instructions marked on the product. 3. If you have concerns about how to use your product after reading this guide, contact Brother customer service or your local Brother dealer.
  • Page 2: Symbols And Conventions Used In The Documentation

    Compilation and Publication Notice This product's manuals have been compiled and published to provide the latest product safety information at the time of publication. The information contained in these manuals may be subject to change. For the latest manuals, visit us at support.brother.com.
  • Page 3: Choose A Safe Location For Your Product

    Choose a Safe Location for Your Product WARNING Choose a location where the temperature remains between 10°C and 35°C, the humidity is between 20% and 80%, and where there is no condensation. DO NOT expose the product to direct sunlight, excessive heat, open flames, corrosive gasses, moisture, or dust.
  • Page 4 • DO NOT place your product next to sources of interference, such as speakers or the base units of non-Brother cordless telephones. Doing so may interfere with the operation of the product's electronic components. • DO NOT place anything in front of the product that will block printed pages or received faxes (MFC models only).
  • Page 5 DO NOT attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltage points and other risks and may void your warranty. Refer all servicing to Brother customer service or your local Brother dealer.
  • Page 6 If water, other liquids, or metal objects get inside the product, immediately unplug the product from the electrical socket and contact Brother customer service or your local Brother dealer. This product should be connected to an AC power source within the range indicated on the rating label (You can find the rating label on your machine).
  • Page 7 Contact Brother customer service or your local Brother dealer. Plastic bags are used in the packing of this product. Plastic bags are not toys. To avoid the danger of suffocation, keep these bags away from babies and children, and dispose of them properly.
  • Page 8 Installation must be performed properly according to the user's guide. • Brother strongly recommends that you DO NOT use any type of extension cord. • This product should be positioned so that nothing pinches or constricts the power cord.
  • Page 9 DO NOT put your hand or any foreign objects into the ink insertion slot. Doing this may cause injury. To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations. DO NOT touch the edges of the metal parts behind the rollers in the grey shaded area shown in the illustration.
  • Page 10 DO NOT carry the product by holding the scanner cover, the Jam Clear Cover, the manual feed slot cover (some models only), or the control panel. Doing this may cause the product to slip out of your hands and may result in injury. Only carry the machine by placing your hands under the entire machine.
  • Page 11 IMPORTANT • A distinct change in the product’s performance may indicate a need for service. • DO NOT connect your product to an electrical socket controlled by wall switches or automatic timers, or to the same circuit as a large appliance or other equipment that requires a significant amount of electricity.
  • Page 12 THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE FITTED WITH THE APPROPRIATE CONNECTOR. Brother advises that this product may not function correctly in a country other than where it was originally purchased, and does not offer any warranty in the event that this product is used on public telecommunication lines in another country.
  • Page 13 Your Declaration will be downloaded as a PDF file. Declaration of Conformity for RE Directive 2014/53/EU (Europe Only) (Applicable to Models with Radio Interfaces) We, Brother Industries, Ltd. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan declare that these products are in conformity with the provisions of the RE Directive 2014/53/EU.
  • Page 14 Imaging Equipment Voluntary Agreement (This applies to new models placed on the EU market after January 2015.) Brother warrants that service parts will be available for at least five years after the end of production. To obtain service parts, contact your Brother supplier or dealer.
  • Page 15: Open Source Licensing Remarks

    Open Source Licensing Remarks This product includes open-source software. Go to the manual download selection of your model’s home page of Brother Solutions Center at support.brother.com to view the Open Source Licensing Remarks and Copyright Information. Copyright and License ©2018 Brother Industries, Ltd.
  • Page 16: Brother Customer Service

    Visit www.brother.com for contact information for your local Brother office. Service Centre Locations For service centres in your country, contact your local Brother Office. Address and telephone contact information for local offices can be found at www.brother.com by selecting your region and country.
  • Page 17 All network ports activated and connected How to enable/disable Wireless LAN • (DCP-J1100DW) To turn on or off the wireless network connection, press [Settings] > [All Settings] > [Network] > [WLAN Enable] > [On] or [Off]. • (MFC-J1300DW) To turn on or off the wireless network connection, press [Settings] >...
  • Page 18 Month of publication: 11/2019   D01GR0001-00 Version B...

This manual is also suitable for:

Mfc-j1300dw

Table of Contents