Table of Contents
Advertisement
How to Connect
the Router
Example:
VPI/VCI = 0/33
Protocol = PPPoA
Encapsulation Method = VCMUX
Modulation Method = G.dmt
Username/Password
Only for PPPoE/PPPoA mode users
Fixed IP Address/ Subnet Mask/ Gateway IP Address
Some ISP will use DHCP method to provide IP address for MPoA mode users,
then users do not need to know the fixed IP address.
If you do not know these information in detail, please contact your ISP to get
these informations.
Local networking
To use the Ethernet port(s) you need at least:
One PC with an Ethernet Card installed.
One ethernet cat-5 UTP cable.
To use the Wireless LAN you need at least:
One PC with a Wireless LAN adaptor installed.
TCP/IP protocol suite
For TCP/IP, your PC can either be set to a static IP, or to get an IP automatically
(from a DHCP server).
The default gateway IP address of the router is 192.168.1.1. If static IP is chosen,
set your PCs IP address to 192.168.1.x , where x is any number in the range 2-254
inclusive.
9
Advertisement
Table of Contents
