Tel M Ute Function; Navigation M Ute Function; Selectable Illumination; Automatic Dimmer Funtion - Kenwood KDC-6060R Instruction Manual

TEL M ut e Funct ion
Shut dow n the audio system temporarily w henever an
incoming call is received.
N OTE
The function w ill not w ork if a cable is not connected to the car
phone.
When the telephone rings:
When a call is received, "CALL" is displayed and all the unit
functions are temporarily interrupted.
Restoring Original Unit Source During Phone Call:
Press the SRC button.
"CALL" disappears from the display, and the volume of the
original source is restored gradually.
Turning TEL M ute Function Off After Phone Call:
Hang the phone up.
"CALL" disappears from the display.
The original source (i.e., the one used before the phone call) is
returned to automatically, and the volume restored gradually.
N avigat ion M ut e Funct ion
When the KENWOOD Navigation System is connected, an
interruption of the audio guide results in the temporary
low ering of the audio level.
N OTE
The Navigation mute function cannot be used unless a TEL mute
cable is connected to the KENWOOD Navigation System.
Select able Illum inat ion
You can sw itch the colour of the button illumination betw een
green and amber.
1
Hold dow n the M ENU button for one second or more.
"M ENU" is displayed and the menu mode is turned on.
2
Press the ¢ button repeatedly until the Selectable
Illumination function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "COL GRN" or "COL AM B"
in the display, indicating that the current colour is green or
amber, respectively.
3
Sw itching settings
Press either the AM button or FM button.
The display and setting w ill change.
4
Press the M ENU button to end the menu mode.
A ut om at ic D im m er Funct ion
The display dims w hen the car's lights are turned on.
N OTE
The dimmer function is not available for units if the dimmer cable
is not connected.
— 31 —
Function of the KDC-6060R