Life Fitness Axiom Series Assembly Instructions Manual page 19

11. NOTE: OPTIONAL: If your product does not include front shrouds, skip this step.
Install screws and shroud retainer grommets into the side tubes of the tower frame using a Phillips screwdriver.
12. Install shroud retainers into holes in the side tubes of the tower frame. Discard shroud retainers if your product
includes front shrouds.
13. Slide weight stack cushions onto the guide rods.
Item
1
2
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
Item
1
Page 17 of 38
Description
Grommet, Shroud Retainer
Screw, M4.2 x 0.7, Phillips
Description
Shroud Retainer
Qty.
6
6
Qty.
6