Life Fitness Axiom Series Assembly Instructions Manual page 16

2. Slide increment weight guide rods through the top of the tower frame and down through the clips in the increment
weight. Place increment weight guide rods into holes at the bottom plate of the tower frame.
3. Thread increment weight guide rods into the bottom plate of the tower frame. Tighten using a crescent wrench.
4. Install nuts and washers securing the increment weight guide rods to the top plate of the tower frame using a 7/16"
wrench.
Item
1 Increment Weight Guide Rod
2
Item
1 Increment Weight Guide Rod
Item
1
2
3 Increment Weight Guide Rod
Tighten hardware to 16-20 in-lb (1.8-2.2 Nm).
Page 14 of 38
Description
Increment Weight
Description
Description
Nut, ¼" Nylock
Washer, Flat ¼" ID
Qty.
2
1
Qty.
2
Qty.
2
2
2