4. Install screws securing the tube caps to the tower frame using a Phillips screwdriver.
5. Press top cap down into the holes at the top of the tower frame.
6. Select the appropriate language from the multilingual label sheet. Remove backing from multilingual label and
apply to the front cap.
Test Unit For Proper Operation.
Item
1
2
3
4
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
Item
1
2
Page 28 of 36
Description
Top Cap
Tube Cap
Screw, 8 x ¾" Phillips
Grommet
Description
Multilingual Label
Front Cap
Qty.
1
2
2
2
Qty.
1
1