Life Fitness Axiom Series Assembly Instructions Manual page 26

Install Work Arm Assembly
1. Slide pivot shaft through the spacers and into the work arm assembly. Align with the main frame.
2. Install screws securing the work arm assembly to the main frame using a 6mm Allen wrench.
3. Pull detent pin out and slide leg extension assembly into work arm assembly.
4. Install screws securing the external glide bushing on the leg extension assembly to the work arm assembly using a
Phillips screwdriver.
5. Pull detent pin out and slide leg curl assembly into work arm assembly.
6. Install screws securing the external glide bushing on the leg curl assembly to the work arm assembly using a
Phillips screwdriver.
Item
1
2
3 Screw, M10 x 1.5, 25mm Flat Head
4
5
Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).
Item
1
2
3
Tighten hardware to 30-39 in-lbs (3.4-4.4 Nm).
Item
1
2
3
Tighten hardware to 30-39 in-lbs (3.4-4.4 Nm).
Page 24 of 36
Description
Work Arm Assembly
Main Frame
Pivot Shaft, 25mm
Spacer, .344"
Description
Leg Extension Assembly
External Glide Bushing
Screw, M5 x 10, Phillips
Description
Leg Curl Assembly
External Glide Bushing
Screw, M5 x 10, Phillips
Qty.
1
1
2
1
2
Qty.
1
1
2
Qty.
1
1
2