Life Fitness Axiom Series Assembly Instructions Manual page 29

Install Front and Top Caps
1. NOTE: OPTIONAL: If your product does not include front shrouds, skip this step.
Set front shrouds into the bottom cap. Install screws securing the front cap to the tower frame using a 10 mm
wrench.
2. Install screws securing the front cap to the tower frame using a 10 mm socket wrench and ratchet.
NOTE: Screw heads can be accessed from the top or bottom.
3. Press grommets into holes at the top of the tower frame.
Item
1
2
3
4
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
Item
1
2
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
Page 27 of 36
Description
Front Cap
Front Shroud, Left
Front Shroud, Right
Screw, M6, HCS, 50 mm
Description
Front Cap
Screw, M6, HCS, 50 mm
Qty.
1
1
1
4
Qty.
1
4