Bake And Roast - GE PVM9179 Owner's Manual

About the Baking and Roasting Features
Correct shelf position
Incorrect shelf position
OR
OR
49-7000089 Rev. 0
Baking or roasting uses a heating element to raise the temperature of the air inside the oven.
Any oven temperature from 225°F to 425°F may be set. A fan gently circulates this heated air
throughout the oven, over and around the food, producing golden brown exteriors and rich,
moist interiors. This circulation of heated air is called convection.
Because the heated air is kept constantly moving, not permitting a layer of cooler air to
develop around the food, some foods cook faster than in regular oven cooking.
For Best Results...
Use one shelf in the lower position and leave at least a 1-inch gap between the cooking dish
and the sides of the oven. For two-level cooking only, use both shelves. Use the circular rack
if possible. If the food is too long to turn (casseroles, lasagnas, etc.) or too tall to fit (roasts,
etc.), we recommend using the rectangular rack in the lower position.
The shelf is required for good air circulation and even browning.
See the Cookware Tips section for information on suggested cookware.
Convection Bake or Convection Roast with Preheat
1
Press the Convection Bake or
Convection Roast button.
2
Turn the dial to set the oven temperature
and press dial to enter. Do not enter
bake time now. (The cook time will be
entered later, after the oven is
preheated.) See the Convection Bake
Offset section below.
3
Press the dial or the Start/Pause button
to start preheating.
4
When the oven is preheated, it will signal.
If you do not open the door within 1 hour,
the oven will turn off automatically.
5
Open the oven door and, using caution,
Convection Bake or Convection without Preheating
1
I f your recipe does not require preheating,
press the Convection Bake or
Convection Roast button. See the
Convection Bake Offset section below.
2
Turn the dial to set the oven temperature
and press to enter.
3
Turn the dial to set the cook time and
press to enter.
4
Press the dial or the Start/Pause button
to start the oven.
Convection Bake Offset
When using Convection Bake, the Convection Bake Offset feature will automatically
convert entered regular baking temperatures to convection baking temperatures.
This feature is activated so that the display will show OFFSET ON and the actual converted
(reduced) temperature. For example, if you enter a regular recipe temperature of 350°F and
press the Start/Pause button, the display will show the converted temperature of 325°F.
This feature can be turned off in the Settings menu. See the Convection Bake Offset
Selection in the About the other features section.
NOTE: If convection baking and the Convection Bake Offset feature is turned off, reduce the
oven temperature 25°F from the recipe to prevent overbrowning on the top of baked goods.
place the food in the oven.
6
Close the oven door. Turn the dial
to set the cook time and press the dial or
Start/Pause to start cooking.
7
When cooking is complete, the oven will
signal and turn off.
NOTE: You may change the cook time at
any time during cooking by turning the dial.
You may change the oven temperature at
any time during cooking by pressing the
Power Level button. Turn the dial to set the
oven temperature and press the dial to enter.
To view the cook time and oven temperature
during cooking, press the Bake button.
NOTE: You may change the cook time at
any time during cooking by turning the dial.
You may change the oven temperature at
any time during cooking by pressing the
Power Level button. Turn the dial to set the
oven temperature and press the dial to enter.
To view the cook time and oven temperature
during cooking, press the Convection Bake
button.
19