Table of Contents
Advertisement
Caution!
Component damage due to freezing liquids
Ambient temperatures that are below freezing will lead to the freezing of any water or cleaning
agent residue remaining inside the unit. This will lead to damage to internal components.
-
Before shipment, storage or relocation of the unit, the unit is to be cleaned and the
cleaning solution is to be fully drained from the unit.
4
Disposal
Disposal of the units must be carried out in compliance with the applicable local and/or national and
international regulations. Units must not be disposed of with household waste.
If the unit contains fuels or lubricants in liquid, paste-like or gaseous form, such as oil, grease, cooling
agents etc., such fuels or lubricants are to be collected using appropriate measures and disposed of in
compliance with the applicable local and/or national and international regulations. Such fuels or lubricants
must always be prevented from seeping into the ground, the sewage system and any bodies of water, and
must always be prevented from entering the atmosphere.
5
Installation Requirements
5.1
Installation Sites
Comply with the valid national regulations for installation sites and electrical connections. Ventilation of the
installation sites must be appropriate for device output. Inadequate ventilation of the device will result in its
overheating and being destroyed. Always make certain that no intake or discharge vents are covered.
Triton 150 HC
Heat output in Watt
Air flow in m
3
/hour
5.2
Electrical Connections
A socket outlet with a grounding contact featuring a maximum protection of 16 amperes is required.
The line voltage must always be within following tolerances: 230 VAC +6%/-10% / 50 Hz
Power consumption in Watt
Cornelius Deutschland GmbH
Document no: TD1011600EN
Version A, 04.04.2019, Index 0
Triton 350 HC
780
290
Triton 150 HC
Triton 350 HC
950
1330
390
Triton 350v HC
1200
1200
Triton HC
Manual operation undercounter cooler
Triton HC
Page 10
Hide quick links:
Advertisement
Table of Contents
