Certification; Approvals; Csa - Siemens RUGGEDCOM RSG2100F Installation Manual

Certification

The RUGGEDCOM RSG2100F device has been thoroughly tested to guarantee its con-
formance with recognized standards and has received approval from recognized reg-
ulatory agencies.
6.1

Approvals

This section details the standards to which the RUGGEDCOM RSG2100F complies.
6.1.1

CSA

This device meets the requirements of the following Canadian Standards Association
(CSA) standards under certificate 16.70068356:
•
•
•
•
•
•
•
•
RUGGEDCOM RSG2100F
Installation Manual, 01/2020, C79000-G8976-1344-07
CAN/CSA-C22.2 No. 60950-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National Standard, with UL 60950-1)
UL 60950-1
Information Technology Equipment – Safety Part 1: General Requirements
CAN/CSA-C22.2 No. 213-M1987
Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Loca-
tions
CAN/CSA-C22.2 No. 60079-0:15
Explosive Atmospheres – Part 0: Equipment – General Requirements
CAN/CSA-C22.2 No. 60079-15:16
Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Construction, Test
and Marking of Type of Protection N Electrical Apparatus
UL 60079-0, Edition 6.0 (2013)
Explosive Atmospheres – Part 0: Equipment – General Requirements
UL 60079-15, Edition 4.0 (2013)
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection N
ANSI/ISA-12.12.01-2013
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Division 1 and 2 Hazardous (Classified) Locations
6
41