Table of Contents
Advertisement
Figure 4.4
Specifications
For specifications on the available copper Ethernet ports, refer to
Port Specifications (Page
4.2
Fiber Optic Ethernet Ports
Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer Reg-
istered Jack), LC (Lucent Connector), SC (Standard or Subscriber Connector) or ST
(Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections
of each port are properly connected and matched to establish a proper link.
RUGGEDCOM RSG2100F
Installation Manual, 01/2020, C79000-G8976-1344-07
Pin
10/100Base-TX
7
Reserved (Do Not Connect)
8
Reserved (Do Not Connect)
1
6
Micro-D 10/100Base-TX and 10/100/1000Base-TX Port Pin Configuration
Pin
1
2
Reserved (Do Not Connect)
3
4
Reserved (Do Not Connect)
5
6
7
Reserved (Do Not Connect)
8
Reserved (Do Not Connect)
9
34)".
Name
1000Base-TX
BI_DD+
BI_DD-
10/100Base-TX
RX+
Reserved (Do Not Connect)
TX+
RX-
TX-
Communication Ports
4.2 Fiber Optic Ethernet Ports
Description
Receive Data- or Bi-
Directional Pair D+
Receive Data- or Bi-
Directional Pair D-
1000Base-TX
A+
C+
D+
B+
A-
C-
D-
B-
"Copper Ethernet
27
Advertisement
Table of Contents
