The Package Contains; Assembly And Adjustment - Stanley SS24 Original Instructions Manual

Cable length (m)
Voltage Amperes
110-127 0 - 2.0
2.1 - 3.4
3.5 - 5.0
5.1 - 7.0
7.1 - 12.0
12.1 - 20.0 20
220-240 0 - 2.0
2.1 - 3.4
3.5 - 5.0
5.1 - 7.0
7.1 - 12.0
12.1 - 20.0 20
LABELS ON TOOL
The label on your tool may include the following symbols:
must read the instruction manual before use.
WARNING! To reduce the risk of injury, the
user
Wear safety glasses or goggles.
Wear ear protection.
Wear a dust mask.
V Volts
A Amperes
Hz Hertz
W Watts
min minutes
Alternating
Current
Position of date code
The Date Code, which also includes the year of
manufacture, is printed into the housing.
7.5 15 25 30 45
Cable rated current (Ampere)
6 6 6 6 6
6 6 6 6 15
6 6 10 15 20
10 10 15 20 20
15 15 20 25 25
20 25 - -
6 6 6 6 6
6 6 6 6 6
6 6 6 6 10
10 10 10 10 15
15 15 15 15 20
20 20 20 25
Direct Current
n No-Load Speed
0
Class II
Construction
Earthing
Terminal
Safety
Symbol
/min. Revolutions or
Reciprocation
per minute
Example:
60

THE PACKAGE CONTAINS

1 1/4 Sander
10
1 Punch plate
15
1 Dust bag
1 Instruction manual
20
1 Warranty card
25
1 Service center list
-
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
-
• Take the time to thoroughly read and understand this
6
manual prior to operation.
6
FEATURES (FIG. A)
15 WARNING: Never modify the power tool or
any part of it. Damage or personal injury could
15
result.
20
1. On/off switch
2. Dust bag
-
3. Sanding base
4. Paper clamp lever
5. Punch plate
6. Dust bag collar
7. Dust extraction outlet

ASSEMBLY AND ADJUSTMENT

WARNING: To reduce the risk of serious
personal injury, turn tool off and disconnect
tool from power source before making any
adjustments or removing/installing attachments
or accessories. Before reconnecting the tool,
depress and release the trigger switch to ensure
that the tool is off. An accidental start-up can
cause injury.
Dust extraction (Fig. B)
WARNING: Since woodworking with a sander
produces dust, always install a dust bag
designed in compliance with the applicable
directives regarding dust emission.
WARNING: Do not use a dust bag or vacuum
extractor without proper spark protection when
sanding metal.
Your sander has a dust extraction methods: a built-in
Alert
outlet (7) which allows either the supplied dust bag (2) or a
shop vacuum system to be connected.
To attach the dust bag
• While holding the sander, fit the dust bag collar(6) to the
outlet (7) as shown in Figure C.
• Turn the collar (6) anticlockwise to lock the dust bag (2)
in place.
ENGLISH (
Original Instructions)
2017 XX JN
Year of manufacturing
7