Additional Specific Safety Rules; Residual Risks; The Package Contains - Stanley SS30 Manual

designed.
b. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c. Disconnect the plug from the power source and/
or remove the battery pack, if detachable from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
e. Maintain power tools and accessories. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If damaged,
have the power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
h. Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5. Service
a. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power tool
is maintained.

ADDITIONAL SPECIFIC SAFETY RULES

Safety Instructions for Sanders
a. Hold the power tools by insulated gripping
surfaces, because the sanding surface may
contact its own cord. Cutting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the opertator an electric shock.
b. Warning! Contact with or inhalation of dusts arising
from sanding applications may endanger the health
of the operator and possible bystanders. Wear a dust
mask specifically designed for protection against dust
and fumes and ensure that persons within or entering
the work area are also protected.
c. Thoroughly remove all dust after sanding.
d. Take special care when sanding paint which is possibly
lead based or when sanding some woods and metal
which may produce toxic dust:
- Do not let children or pregnant women enter the work
area.
- Do not eat, drink or smoke in the work area.
- Dispose of dust particles and any other debris safely..
Additional Safety Information
WARNING: We recommend the use of a residual
current device with a residual current rating of
30mA or less.

RESIDUAL RISKS

In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks cannot be avoided. These are:
– I mpairment of hearing
– R k s i f o e p s r n o l a n i
– R isk of burns due to accessories becoming hot
during operation.
– R k s i f o e p s r n o l a n i
– R isk of dust from hazardous substances.
LABELS ON TOOL
In addition to the pictographs used in this manual, the
labels on the tool show the following pictographs:
Read instruction manual before use.
Wear ear protection.
Wear safety glasses.
Wear a dust mask.
Date Code Position (Fig. B)
The Date Code, which also includes the year of
manufacture, is printed into the housing.
Example:
2018 XX XX
Year of Manufacture Package Contents

THE PACKAGE CONTAINS

1 Random orbital sander
1 Sanding paper
1 Dust bag
1 Instruction manual
1 Warranty card
1 Service center list
♦ Check for damage to the tool, parts or accessories
which may have occurred during transport.
♦ Take the time to thoroughly read and understand this
manual prior to operation.
ENGLISH
u j y r u d f e i y l g n p r a c i t e l . s
u j y r d e u o t p o r o l g n d e s u . e
5