General Function Switch - S100 - Motorola G24-L Technical Information

General Function Switch - S100

Figure 2-17
Figure 2-17: S100 Switches
The S100 switches description and functionality are shown in
Reference
WAKE
The WAKEUP switch is con-
nected to the G24's internal
wakeup interrupt module
using the WKUPI_N signal.
IGN
The IGN switch activates the
G24-L ignition circuits using
the IGN signal.
Note:
Note:
September 25, 2007
shows the S100 switches.
Table 2-15: S100 Switches Functionality
Description
Sets the WAKEUP switch to OFF
to enable entering Sleep mode.
Turns the G24-L off.
Generally, your application wakes up the G24-L. In cases where the application is not
ready for integration, you can force wakeup of the G24-L by setting the switch to ON.
When using G24-L Charger model, the ignition line is shorted with the USB.
G24-L Developer's Kit
Chapter 2: Developer Board and Interfaces Description
S100
Table
"Off" State
2-14.
"On" State
Sets the WAKEUP switch
to ON to enable wake up
(see Note).
Turns the G24-L on using
the on board 5V booster.
27