Download Print this page
Fortinet FortiGate-80 CM Quick Start Manual

Fortinet FortiGate-80 CM Quick Start Manual

Hide thumbs Also See for FortiGate-80 CM:

Advertisement

LED
State
Green
Power
Off
Flashing Green
Status
Green
Red
Green
Internal, DMZ,
WAN1, WAN2
Flashing Green
Off
HA
Green
Red
Alarm
Amber
Off
Visit these links for more information and documentation for your Fortinet product.
• Technical Documentation - http://docs.fortinet.com
• Fortinet Knowledge Center - http://kb.fortinet.com
• Fortinet Technical Support - http://support.fortinet.com
• Training Services - http://campus.training.fortinet.com
Package Contents
Interface
Type
Speed
Internal
RJ-45
10/100 Base-T
WAN1 and
RJ-45
10/100/1000
WAN2
Base-T
DMZ
RJ-45
10/100 Base-T
Console
RJ-45
9600 Bps
8/N/1
USB
USB
Modem
RJ-11
Express-
Express-
Card slot
Card/34,
Express-
Card/54
POWER STATUS
Power
LED
Connecting
Before you begin
If using the wall-mount kit remove the rubber feet before attaching the wall mount brack-
ets.
Connect the following to the FortiGate unit. Ensure the FortiGate unit is placed on a stable
surface.
Insert a network cable to WAN1. Insert the other end to the router connected to the
Internet, or to the modem.
Connect a network cable to the Internal port 1, 2 and 3.
Insert the other end to a computer or switch.
Connect the AC Power Cable to the Power Supply.
Connect the Power Cord to a surge protected power bar or power supply.
Insert the pointed end of the cable tie into the hole in the rear panel of the chassis to
anchor the cable tie to the chassis.
Loop the loose end around the adapter cable and insert the loose end into the locking
latch.
Pull the loose end to adjust the tightness of the loop around the adapter cable to pre-
vent cable from being accidentally pulled out the FortiGate unit.
Optional
Insert the ExpressCard (not supplied) into the ExpressCard 3G slot.
Configuration Tools
Web-based manager
The FortiGate web-based manager is an easy to use management tool.
Use it to configure the administrator password, the interface and default gateway addresses,
and the DNS server addresses.
Requirements:
An Ethernet connection between the FortiGate unit and management computer.
A web browser such as FireFox or Internet Explorer on the management computer.
Description
The FortiGate unit is on.
The FortiGate unit is off.
The FortiGate unit is starting up.
The FortiGate unit is running normally.
Modem is in use and connected.
The correct cable is in use and the connected
equipment has power.
Network activity at this interface.
No link established.
The FortiGate unit being used in an HA cluster.
A critical error has occurred.
A minor error has occurred.
No errors detected.
Protocol
Description
Ethernet
A 6-port switch connection for up to six devices or the
internal network.
Ethernet
Redundant connections to the Internet.
Ethernet
Optional connection to a DMZ network or to other
FortiGate-80CM units for high availability (HA).
RS-232
Optional connection to the management computer. Pro-
vides access to the command line interface (CLI).
USB
Two optional connections for the USB key, modem, or
backup operation.
Phone line for modem.
The Universal ExpressCard slot adds wireless com-
munications.
INTERNAL
1
3
5
HA
ALARM
WAN 1 WAN 2
DMZ
2
4
6
Internal
WAN
Interface
Interfaces
Status
DMZ
LED
LED
QuickStart Guide
POWER STATUS
© Copyright 2010 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trademarks
of their respective holders.
Regulatory Compliance
FCC Class B Part 15 CSA/CUS
15 June 2010
Cable Tie
Power Supply
5
DC+12V
CONSOLE
USB
6
USB
Power
Ground
Connection
Cable Tie
Internal Interface,
RJ-45 Serial
Mounting
switch connectors
Connection
Hole
Power cable connects to power supply
Optional RS-232 serial cable connects to serial port on
management computer
5
DC+12V
CONSOLE
USB
6
Ethernet cables connect
Straight-through
to computers on internal network
Command Line Interface (CLI)
The CLI is a full-featured management tool. Use it to configure the administrator password,
the interface addresses, the default gateway address, and the DNS server addresses.
Requirements:
The RJ-45 to DB9 serial connection between the FortiGate unit and management
computer.
A terminal emulation application (HyperTerminal for Windows) on the management
computer.
INTERNAL
1
3
5
HA
ALARM
WAN 1 WAN 2
DMZ
2
4
6
01-412-89806-20090615
QuickStart Guide
2 Mounting Brackets
Copyright 2009 Fortinet Incorporated. All rights reserved.
Trademarks
Straight-through
Ethernet cable
AC Power Cable
INTERNAL
3
1
DMZ
WAN 2
WAN 1
MODEM
4
2
DMZ
WAN1
WAN2
Modem
1 to 6
INTERNAL
3
1
4
2
DMZ
WAN 2
WAN 1
Straight-through Ethernet
cables connect to Internet
Optional connection to
DMZ network
FortiGate-80CM
FortiGate-30B
INTERNAL
1
3
5
POWER STATUS
HA
ALARM
WAN 1 WAN 2
DMZ
2
4
6
Welcome | Bienvenue | Willkommen |
| Bienvenido | Benvenuto
RJ-45 to
DB-9 Serial Cable
MODEM

Advertisement

loading

Summary of Contents for Fortinet FortiGate-80 CM

  • Page 1 Amber A minor error has occurred. No errors detected. Visit these links for more information and documentation for your Fortinet product. • Technical Documentation - http://docs.fortinet.com © Copyright 2010 Fortinet Incorporated. All rights reserved. • Fortinet Knowledge Center - http://kb.fortinet.com Products mentioned in this document are trademarks or registered trademarks of their respective holders.
  • Page 2: General Settings

    Enter the Management IP address and netmask that you recorded above and select Apply. To configure the Primary and Secondary DNS server IP addresses Go to System > Network > Options, enter the Primary and Secondary DNS IP ad- dresses that you recorded above and select Apply. Refer to the Fortinet Technical Documentation website for information on how to control traffic, and how to configure HA, antivirus protection, FortiGuard, Web content filtering, Spam filtering, intrusion prevention (IPS), and virtual private networking (VPN).

This manual is also suitable for:

Fortigate-80c-lencFortigate-80cm