Adding Firewall Policies For Modem Connections - Fortinet FortiGate FortiGate-60M Installation Manual

Adding firewall policies for modem connections

Adding firewall policies for modem connections
62
3 For Fail-over Detection, type a number of times that the connection test fails before
the FortiGate unit assumes that the gateway is no longer functioning.
4 Select Apply.
The modem interface requires firewall addresses and policies. You can add one or
more addresses to the modem interface. For information about adding addresses, see
the FortiGate Administration Guide. When you add addresses, the modem interface
appears on the policy grid.
You can configure firewall policies to control the flow of packets between the modem
interface and the other interfaces on the FortiGate unit. For information about adding
firewall policies, see the FortiGate Administration Guide.
01-28008-0111-20050128
Configuring the modem interface
Fortinet Inc.