Configuring Transparent Mode; Using The Web-Based Manager To Configure Transparent Mode - Fortinet FortiGate FortiGate-5005-DIST Getting Started

Fortinet fortigate fortigate-5005-dist: user guide
Hide thumbs Also See for FortiGate FortiGate-5005-DIST:
Table of Contents

Advertisement

Configuring Transparent mode

Configuring Transparent mode

Using the web-based manager to configure Transparent mode

28
Use
Table 6
to gather the information you need to customize Transparent mode
settings.
Table 6: Transparent mode settings
Admin Administrator Password:
IP:
Netmask:
Management IP
The management IP address and netmask must be valid for the
network where you will manage the FortiGate unit.
Default Gateway IP address:
In Transparent mode the default route requires the default gateway IP
Default Route
address. The default route directs all non-local traffic to the external
network.
Primary DNS Server:
DNS Servers
Secondary DNS Server:
1
Connect the Management interface of the FortiController-5208 module to the
same hub or switch as the computer you will use to configure the FortiGate
module.
2
Configure the management computer to be on the same subnet as the port1
interface of the FortiGate-5005FA2 module. To do this, change the IP address of
the management computer to 192.168.1.2 and the netmask to 255.255.255.0.
3
To access the FortiGate web-based manager, start Internet Explorer and browse
to https://192.168.1.99 (remember to include the "s" in https://).
4
Type admin in the Name field and select Login.
To switch from NAT/Route mode to transparent mode
1
Go to Worker Blade > System > Status and select the Change link beside
Operation Mode: NAT.
2
Set Operation Mode to Transparent.
3
Set the Management IP/Netmask to 192.168.1.99/24.
4
Set the default Gateway to 192.168.100.1 and select Apply.
5
When complete, select I/O Blade to return to the FortiController-5208 interface.
To change the admin administrator password
1
Go to Worker Blade > System > Admin > Administrators.
2
Select Change Password for the admin administrator, enter a new password, and
select OK.
3
When complete, select I/O Blade to return to the FortiController-5208 interface.
Quick Configuration Guide
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
FortiGate-5005-DIST Security System Getting Started
01-30000-0414-20070615

Advertisement

Table of Contents
loading

Table of Contents