Changing Menu Options - Sony SLV-N99 Operating Instructions Manual

010ADDO.fm Page 88 Friday, November 30, 2001 1:54 PM

Changing menu options

1
Press MENU, then select ADVANCED OPTIONS and press OK.
2
Press M / m to highlight the option to change, then press OK.
To go to PAGE2, highlight NEXT and press OK. To return to PAGE1, highlight
PREVIOUS and press OK.
3
Press M / m to change the setting, then press OK.
To adjust the sharpness, press < / , and press OK.
4
Press MENU to return to the original screen.
Menu choices
Initial settings are indicated in bold print.
PAGE 1
Menu option
AUTO ANT SELECT
AUTO STEREO
TUNER AUDIO
TAPE SELECT
AUTO TAPE SPEED
88
Changing menu options
ADVANCED OPTIONS
PAGE 1
AUTO ANT SELECT ON
AUTO STEREO ON
TUNER AUDIO MAIN
TAPE SELECT AUTO
AUTO TAPE SPEED ON
FAVORITE CH ON
NEXT
RETURN
SELECT :
SET : OK
QUIT : MENU
Set this option to
• ON if your TV is connected only to VHF/UHF OUT on the
VCR. To play a tape, set the TV to the VCR channel (channel
3 or 4).
• OFF if your TV is connected to both VHF/UHF OUT and
LINE OUT on the VCR. To play a tape, set the TV to the VCR
input.
• ON to receive stereo programs.
• OFF to reduce noise. The sound changes to monaural.
• MAIN to record the main sound on both hi-fi and normal audio
tracks.
• SAP to record the SAP (Second Audio Program) sound on both
hi-fi and normal audio tracks.
• AUTO when using a T-160 length tape or any tape shorter than
a T-140 length tape.
• 180 when using a T-140 or T-180 length tape.
For details, see page 59.
• ON to change the timer recording tape speed automatically to
the EP mode when the remaining tape length becomes shorter
than the recording time. To operate AUTO TAPE SPEED, set
TAPE SELECT correctly.
• OFF to keep the same tape speed.
filename[010ADDO.fm] model name1[SLV-N99]
ADVANCED OPTIONS
PAGE 2
APC ON
REALITY REGENERATOR ON
SHARPNESS L H
PREVIOUS
RETURN
SELECT :
SET : OK
QUIT : MENU
[3-071-065-11(1)]