Sony SLV-N99 Operating Instructions Manual page 51

010GET.fm Page 51 Friday, November 30, 2001 1:47 PM
To select the channel map
If the program information signal
in your area has several channel
map patterns (up to 8), the
CHOOSE YOUR CABLE CH
MAP menu appears:
• the first time you turn on the
VCR after completing channel
mapping
• after selecting AUTO and
pressing OK on the SMART
CHANNEL MAPPING menu
In this case, you have to select the channel map on the CHOOSE YOUR CABLE CH
MAP menu.
1
Find the VCR Plus+ GOLD system Channel Listing in your program guide. For
details, see page 48.
2
Press M / m to highlight the channel map number you want by checking the
channel number in the program guide.
3
Press OK.
Notes
• It takes about one hour to complete channel mapping.
• The VCR can receive the program information signal only while the VCR is turned off and
no timer recordings are set.
• The VCR cannot set the guide channels correctly unless you enter the ZIP/POSTAL CODE in
your area.
• When you move to a different area, you must set up the VCR again and enter your new ZIP/
POSTAL CODE in the EASY SET UP procedure.
Channel map
Station ID
number
SET VCR Plus+ sys. CH
CHOOSE YOUR CABLE CH MAP
MAP 1 KCET
MAP 2 WNET
MAP 3 ABC
MAP 4 FAM 1
MAP 5 A&E
MAP 6 KAET
MAP 7 CBS
MAP 8 – – – –
SELECT :
SET : OK
QUIT : MENU
Channel number
continued
Setting up the VCR Plus+® GOLD system
filename[010GET.fm] model name1[SLV-N99]
4 5
1 3
9 8
2 0
2 3
2 9
4
– –
51
[3-071-065-11(1)]