Setting The Recording Duration Time - Sony SLV-N99 Operating Instructions Manual

010ADDO.fm Page 75 Friday, November 30, 2001 1:54 PM

Setting the recording duration time

After you have started recording, you can
have the VCR stop recording automatically
after a specified duration.
1
While recording, press z REC.
The indicator appears in the display window.
2
Press z REC repeatedly to set the duration time.
Each press advances the time in increments of 30 minutes.
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
To extend the duration
Press z REC repeatedly to set a new duration time.
To cancel the duration
Press z REC repeatedly until the
normal recording mode.
To stop while recording
Press x STOP.
Note
• You cannot display the current tape time in the display window when setting the recording
duration time.
0:30 1:00 5:30
indicator disappears and the VCR returns to
Setting the recording duration time
filename[010ADDO.fm] model name1[SLV-N99]
z REC
VIDEO APC
SP
Normal recording
6:00
[3-071-065-11(1)]
75