Sony SLV-N99 Operating Instructions Manual page 15

010GET.fm Page 15 Friday, November 30, 2001 1:47 PM
Hookup 2
Connecting to a digital satellite receiver
Recommended use
Use this hookup if you have a digital satellite receiver that is compatible with the
Cable Mouse. It allows the VCR's cable box control feature to control the channel on
the digital satellite receiver, simplifying the recording process. A list of compatible
digital satellite receivers is on page 39.
What you can do with this hookup
• Record any channels by using the Cable Mouse to select channels on the digital
satellite receiver
What you can't do
• Record with the digital satellite receiver turned off
• Record any channels from cable or an antenna (To record channels from cable or
an antenna, turn off the cable box control feature.)
• Use a cable box
• Record programs with the VCR Plus+ GOLD system (To use the VCR Plus+
GOLD system, turn off the cable box control feature.)
Wall
or
PLUG IN
(
POWER
CABLE BOX
CONTROL
CONTROL S
VCR
) VHF/UHF
AUDIO VIDEO
IN
LINE-1
IN
OUT
OUT
LINE
OUT
RM-CM101
Cable
Mouse
(not supplied)
VHF/UHF
LINE
IN
OUT
OUT
AUDIO VIDEO
Digital satellite
receiver
Rear of TV
VHF/UHF
Match the
A
type of
connector on
or
your TV: A,
VHF
B, or C.
B
For connector
UHF
or
types B and
VHF
C, no UHF
connection is
C
required.
UHF
Positioning the Cable Mouse
Place the Cable Mouse so that it
hangs out over the front of the
remote sensor on the digital
satellite receiver.
Side view
continued
Hookups
filename[010GET.fm] model name1[SLV-N99]
[3-071-065-11(1)]
15