Searching For A Selected Point On The Tape - Sony SLV-N99 Operating Instructions Manual

010ADDO.fm Page 81 Friday, November 30, 2001 1:54 PM

Searching for a selected point on the tape

You can easily find a specific point by
moving the pointer on the TV screen.
The VCR fast-forwards or rewinds to the
point you indicate and starts playback
automatically.
1
Press DISPLAY repeatedly until the bar
indication appears on the TV screen.
A cursor ( x ) indicating the current position of
the tape appears on the bar indication. If the
cursor does not appear, play the tape a few
moments (by pressing H PLAY, M FF, or
m REW) until the cursor appears.
2 Press < / , to move the pointer ( V ) to the point
where you want to start playback.
The VCR starts searching and the cursor ( x )
moves toward the pointer. When the VCR locates
the marked point, playback starts.
DISPLAY
1 2 3
4 5 6
7 8 9
0
</,
0
0
continued
Searching for a selected point on the tape
filename[010ADDO.fm] model name1[SLV-N99]
1 2 0
1 2 0
81
[3-071-065-11(1)]