Searching For A Selected Point On The Tape - Sony SLV-M20HF Operating Instructions Manual

Searching for a
selected point on
the tape
You can easily find a specific point by
moving the pointer on the TV screen.
The VCR fast-forwards or rewinds to the
point you indicate and starts playback
automatically.
1
Press DISPLAY repeatedly until the bar
indication appears on the TV screen.
A cursor ( ) indicating the current position
of the tape appears on the bar indication. If
the cursor does not appear, play the tape a
few moments (by pressing · PLAY,
) FF or 0 REW) until the cursor
appears.
2
Push the cursor stick to ?// to move the
pointer (+) to the point where you want to
start playback.
The VCR starts searching and the cursor
( ) moves toward the pointer. When the
VCR locates the marked point, playback
starts.
To cancel searching
Press · PLAY or p STOP.
To turn off the bar indication
Press DISPLAY again.
1 2 3
4 5 6
7 8 9
0
0
0
Additional Operations
DISPLAY
Cursor stick
?//
120
120
continued
21