Periodic maintenance and adjustment
Replacing the fuse
1. Fuse
The fuse holder is located under the
seat. (See page 4-9.)
If the fuse is blown, replace it as fol-
7
lows.
1. Turn the key to "OFF" and turn off
all electrical circuits.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15132]
EAU23485
Specified fuse:
15.0 A
3. Turn the key to "ON" and turn on
the electrical circuits to check if
the devices operate.
1
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
Headlight
This model is equipped with an LED-
type headlight.
If a headlight does not come on, have
a Yamaha dealer check its electrical
circuit.
NOTICE
Do not affix any type of tinted film or
stickers to the headlight lens.
7-27
EAU62850
ECA16581