Table of Contents
Advertisement
E. Baffle
1. Remove all ash from the firebox, and extinguish all hot embers before disposal into a metal container.
2. The baffle board has 2 pieces. With the ceramic blanket still in place, slide one baffle piece over the top of other one and
pull out top piece through the door opening and then remove bottom baffle piece (Figure 24.1).
3. Remove the ceramic blanket.
4. Re-install the baffle pieces one piece at a time. Be sure the baffle boards are even with the front manifold tube and is
resting on all tubes (Figure 24.3 and Figure 24.4).
5. To re-install the ceramic blanket, it is easier to fold it in half first. Place on top of baffle board, open up and flatten and
smooth out the blanket. Re-check the baffle board for correct positioning (Figure 24.23 and Figure 24.4).
Figure 24.1 - Baffle
Figure 24.2 - Ceramic Blanket
24
Fiber Blanket Service Part: 832-3390
Baffle Board Service Part: SRV27039-111
Figure 24.3
Figure 24.4
7039-802B
Baffle Board even with front tube & resting
on all tubes
Ceramic Blanket on Top
Tube Channels
Burn Rate
Air Control
Start-Up Air
Control
2 pc Baffle Board
March 26, 2020
Advertisement
Table of Contents
