Correct Baffle & Blanket Placement - Quadra-Fire 57ST-ACC-C Owner's Manual

5700 step top wood appliance series automatic combustion control (acc)
Hide thumbs Also See for 57ST-ACC-C:
Table of Contents

Advertisement

57ST-ACC-C
H. Correct Baffle & Blanket Placement
WARNING
Fire Risk.
Firebox damage due to improper baffle
placement is not covered by warranty. Operate
the wood burning appliance with the baffle in
the correct position only.
Not doing so could result in:
Reduced efficiency
Overheating the chimney
Overheating the rear of the firebox
Poor performance
Ensure correct baffle placement and replace
baffle components if damaged or missing.
CAUTION
The baffle boards are FRAGILE. Use extreme caution
when loading firewood to prevent:
Cracking, breaking or damaging the baffle boards
DO NOT operate the appliance without baffle boards
CORRECT POSITION
Ceramic Blanket
Baffle Retainer Bracket
Baffle Board
Ceramic Blanket and Baffle Board MUST be in contact
with the back of the firebox and even with each other in
the front.
Figure 14.1
14
Ceramic Blanket and Baffle Board are NOT in contact
with the back of the firebox.
Ceramic Blanket is NOT in contact with the back of the
Back of Firebox
firebox and NOT even with the Baffle Board in the front.
Ceramic Blanket is bunched up at the back of the firebox
and NOT even with the Baffle Board in the front.
Figure 14.2
7038-227C
INCORRECT POSITIONS
Ceramic Blanket
Baffle Board
Back of Firebox
August 13, 2018

Advertisement

Table of Contents
loading

This manual is also suitable for:

5700 series

Table of Contents