Lint Bucket - Fisher & Paykel SmartLoad DE62T27GW1 Installation Instructions And User Manual

Using Your Dryer

3. Lint Bucket

The SmartLoad™ dryer's lint removal system is unique.
Unlike other dryers, the SmartLoad™ dryer automatically
removes the lint for you – all you have to do is tip the lint
out!
The lint filter is hidden behind the lint bucket. As the air
passes through this filter the lint is caught on the fine
mesh. Once the lint is about 1⁄8" (2mm) thick it comes
into contact with a scraper which deposits it into the
bucket. This process is automatically performed every
time lint builds up on the filter.
Apart from the benefit of not having to scrape the lint
after every cycle, it also means the drying efficiency is
not affected by lint build-up during the drying cycle.
The lint bucket is located inside the dryer on the left-
hand side. You can remove it by gently pulling the
handle and lifting outwards. It slots easily back into place.
This lint bucket does not need to be cleaned as regularly
as other dryer's lint filters. The lint bucket only needs
to be emptied before the lint reaches the top of the
transparent section.
It is important that you run your dryer with the lint bucket in place at all times.
4. Power
To turn on your dryer, press the POWER button located at the top
left-hand corner of the control panel.
38
Empty before this
level is reached