Installation - Fisher & Paykel SmartLoad DE62T27GW1 Installation Instructions And User Manual

Installation

Parts and literature are packaged inside the dryer drum.
Only remove the packaging at the customer's premises.
This will ensure the appliance arrives in pristine condition and reduces the risk of damage when
transporting to the customer's home.
Unpacking
Make sure dryer is in a suitable location for installation.
Consider installing the dryer before the washing machine in a side by side installation, this will
allow better access to electrical and exhaust connections.
Remove Packaging
1.
1. Remove straps.
4.
4. Remove the carton
by lifting it off the
product (do not cut
the carton off ).
20
WARNING
Excess Weight Hazard
Use two or more people to move and install the dryer.
Failure to do so can result in back or other injury.
2.
2. Unfold the bottom flaps
on the carton.
5.
Tilt
Walk
off
Slide out
5. Remove the basepacker
by tilting the product
back and walking the
product off.
3.
3. Unfold the top flaps on
the carton, remove top
packer.
6.
6. Remove the drum packer
and the tape from the
lint collector bucket in
the drum.