Table of Contents
Advertisement
Lint bucket
The AeroSmart dryer's lint removal system is unique.
Unlike other dryers, the AeroSmart dryer automatically
removes the lint for you, from the lint screen – all you
have to do is tip the lint out!
The lint filter is hidden behind the lint bucket. As the air
passes through this filter the lint is caught on the fine
mesh. Once the lint is about 1⁄8" (2 mm) thick it comes into
contact with a scraper which deposits it into the bucket.
This process is automatically performed every time lint
builds up on the filter.
Apart from the benefit of not having to scrape the lint
after every cycle, it also means the drying efficiency is not
affected by lint build-up during the drying cycle.
The lint bucket is located inside the dryer on the left-hand
side. You can remove it by gently pulling the handle and
lifting outwards. It slots easily back into place.
This lint bucket does not need to be cleaned as regularly
as other dryer's lint filters. The lint bucket only needs to
be emptied before the lint reaches the top of the
transparent section.
Important!
It is important that you run your dryer with the lint bucket in place at all times.
Using your dryer
Fig.43 Removing lint bucket
Fig.44 Maximum lint level
37
Empty before this
level is reached
Hide quick links:
Advertisement
Table of Contents
