Activating Optional Aux 1 (Optional); Using The Car Finder Feature; Using The Personal Protection Alarm; Valet Mode - Code Alarm ca 1151 Owner's Manual

Vehicle security and keyless entry system professional series

Hide thumbs Also See for ca 1151:

Table of Contents

Activating Optional AUX 1 (Optional)

If this feature is enabled on your system, pressing the

simultaneously will activate an optional feature. This feature can be programmed

for a wide range of functions like power window or sunroof automation, please

consult your installing dealer to determine the functionality of your system.

Using the Progressive Car Finder Feature

Press the

volume, increasing in volume each time the button is pressed.

Using the Personal Protection Alarm (Panic)

Press and hold the

During panic mode, the normal function of the transmitter buttons will be suspended.

The transmitter's

option is installed). To stop the alarm, press and hold the

again for 3 seconds. The system will automatically stop after 30 seconds.

When valet mode is activated the status LED will light solid, and all security

functions will be disabled. To enter or exit valet mode simply follow the 4 steps

outlined below:

Turn the vehicle's ignition ON.

Push and hold the programming/valet button.

The LED will turn on solid when valet mode is active

Release the programming/valet button.

Eliminating Lock / Unlock Notification Chirps

System lock and unlock notification chirps can be toggled ON or OFF without

entering the programming feature banks.

Turn the ignition ON then OFF.

Press and release the valet/programming button 3 times. The system

will respond with 1 chirp for ON or 2 chirps for OFF.

button to locate your vehicle. The system will sound 5 times at low

button for 3 seconds to activate the personal protection alarm.

and

buttons can be used to lock and unlock the door (if the

and

buttons

button on the transmitter

Table of Contents