HP 5130-24G-4SFP+ EI Installation Manual page 56

Status
Flashing green
Steady yellow
Flashing yellow (not 3
Hz)
Flashing yellow (3 Hz)
Off
Description
The port is sending or receiving data at 10 Gbps.
A transceiver module is installed in the port. The port is operating at 1 Gbps and
a link is present on the port.
The port is sending or receiving data at 1 Gbps.
POST has failed on the port.
•
No transceiver module is installed in the port, or no link is present on the port.
•
The port mode LED is operating in PoE mode (applicable to the PoE switch
models.)
54