Table of Contents
Advertisement
LED mark
Power module status LED
The HP 5130-24G-SFP-4SFP+ EI/HP 5130-24G-SFP-4SFP+ EI TAA switch provides the PWR1 and PWR2
LEDs on the front panel to indicate the operating status of the power supplies.
Table 18 Power module status LED description
LED mark
PWR1/PWR2
RPS status LED
The HP 5130-24G-PoE+-4SFP+ (370W) EI, HP 5130-24G-PoE+-4SFP+ (370W) EI TAA, HP
5130-48G-4SFP+ EI, HP 5130-48G-4SFP+ EI TAA, HP 5130-48G-PoE+-4SFP+ (370W) EI, and HP
5130-48G-PoE+-4SFP+ (370W) EI TAA switches support RPS input and provide an RPS status LED on the
front panel to indicate the RPS operating status.
Table 19 RPS status LED description
LED mark
RPS
Port mode LED
The HP 5130-24G-PoE+-4SFP+ (370W) EI, HP 5130-24G-PoE+-4SFP+ (370W) EI TAA, HP
5130-48G-PoE+-4SFP+ (370W) EI, and HP 5130-48G-PoE+-4SFP+ (370W) EI TAA switches provide a
port mode LED. The port mode LED indicates the type of information that the network port LEDs are
showing. You can use the port LED mode switching button to change the type of displayed port
information.
Status
Off
Status
Description
A power supply is installed in the power supply slot, and the power
Steady green
supply is outputting power correctly.
A power supply is installed in the power supply slot, but the power
Steady yellow
supply is faulty or not powered on..
A power supply is installed in the power supply slot, but the power
Steady red
supply is faulty.
Off
No power supply is installed in the power supply slot.
Status
Description
Steady green
Both the RPS DC input and the AC input are normal.
The RPS DC input is normal, but the AC input is disconnected or
Steady yellow
has failed.
Off
The RPS DC input has failed, or no RPS is connected.
Description
The switch is powered off.
49
Hide quick links:
Advertisement
Table of Contents
